Lock

TOSIBOX® Lock is an intelligent remote access and networking device that serves as an endpoint for secure remote connections. Devices connected to the Lock are securely accessed over the Internet and most LAN and WAN networks through an encrypted VPN connection.

When to use Layer 2 or Layer 3
Tosibox remote connections support two different connection types: Layer 2 (bridged) and Layer 3 (routed). Their properties are: Layer 2 connection Al...
Fri, 19 Aug, 2022 at 12:11 AM
How to set up 1:1 NAT on Lock (Lock & Client mode)
Sometimes you don’t have the possibility to use the Lock default IP address range, e.g. when you need to connect to a device located in an established custo...
Thu, 10 Mar, 2022 at 7:50 AM
How to change the Lock to Client mode
In Client Mode, the Lock is not acting as a router / firewall on the network, it’s acting as a client. This means the Lock will provide a secure remote acce...
Thu, 3 Mar, 2022 at 11:33 AM
How to connect the Lock Internet using WLAN
The Lock can be connected to Internet using WLAN. Note: Lock will automatically change LAN to default configuration if WLAN is enabled when Lock is set ...
Wed, 25 May, 2022 at 11:30 PM
How to use the Lock as WLAN access point
The Lock can be used as a WLAN access point when it is not in Client mode. By default the WLAN access point is disabled. The WLAN access point can be enable...
Mon, 21 Feb, 2022 at 7:47 AM
Restoring factory settings on the Lock
On Lock software version 3.1.0 and later, you can reset the Lock to factory defaults. First click on “Settings”: Then select “Reset and restore...
Mon, 21 Feb, 2022 at 7:57 AM
How to remove serializations from the Lock
Removing the serializations from the Lock requires a working internet connection for the Lock. Log in to the Lock’s browser interface as the admin user. ...
Mon, 21 Feb, 2022 at 7:59 AM
How to enable remote support
Login to Lock with Key (Connect to Lock and double click name) or from service port (plug cable to service port and type 172.17.17.17 to browser). Go...
Mon, 21 Feb, 2022 at 7:54 AM
How to set up Lock – Sub Lock Connection
Users can create direct point-to-point connections between two Tosibox Locks by creating a Lock - Sub Lock Connection. These point-to-point connections are ...
Mon, 21 Feb, 2022 at 8:48 AM
Testing the internet connectivity of the Lock
You can see the Internet connection status on the main page of the Lock’s browser interface (“Status” page). If the data is not visible (“Internet connectio...
Mon, 17 Jan, 2022 at 7:04 PM

Check product details on our website