Lock

TOSIBOX® Lock is an intelligent remote access and networking device that serves as an endpoint for secure remote connections. Devices connected to the Lock are securely accessed over the Internet and most LAN and WAN networks through an encrypted VPN connection.

How to add a fixed IP address device into the Lock
When adding a device with a fixed IP address, please make sure that the device to be added and the Lock have the same IP address space and netmask. For inst...
Thu, 3 May, 2018 at 10:55 AM
How to use the service port of the Lock
You can connect to the Lock via its service port when needed. The settings of the Lock don’t have an effect on the functioning of the service port. Set up...
Thu, 3 May, 2018 at 10:59 AM
How to configure the DHCP server of the Lock
The DHCP server is automatically enabled by default (from Lock SW 2.3.2). Do not switch off the DHCP server if there is no other DHCP server in the Lock’s L...
Thu, 3 May, 2018 at 11:01 AM
How to update the Lock software
The software of the Lock should be updated regularly. It is recommended to have the automatic updates enabled. The Lock will check the updates at a specif...
Thu, 3 May, 2018 at 11:00 AM
How to restrict Key access on Lock network
To restrict a Key access to certain devices on Lock network, you need to enable MAC / IP Filter on Advanced Settings: Select “Enable IP/MAC filt...
Wed, 30 May, 2018 at 12:31 PM
How to use the Lock as WLAN access point
The Lock can be used as a WLAN access point when it is not in Client mode. By default the WLAN access point is disabled. The WLAN access point can be enable...
Thu, 3 May, 2018 at 11:04 AM
How to change LAN IP address space settings
If you need to make changes to LAN IP address space on the Lock, it is recommended you do so locally from the Service port. If you change these settings rem...
Thu, 3 May, 2018 at 10:55 AM
How to block Internet access via the Lock
By default, Internet access via the Lock is allowed. You can deny Internet access via the Lock by signing in as the admin user and choosing Settings >...
Thu, 3 May, 2018 at 10:57 AM
How to connect to Network Devices using FTP
Some FTP programs default to “active” mode, which can cause problems with Key connection type “Layer 3 – routed”. Possible solutions: Change FTP program t...
Thu, 3 May, 2018 at 10:54 AM
TOSIBOX® Lock and Cisco / WatchGuard routers
When using the Lock in Client mode with Cisco or WatchGuard routers, you must turn off the network device auto-discovery at Settings > Industry settings ...
Fri, 13 Apr, 2018 at 7:00 AM

Check product details on our website