| Version | 175 | 610 | 650 | 670 | 675 |
| 5.2.1 | x | x | x | x | x |
| 5.0.0 | x | x | x | x | |
| 4.7.0 | x | x | x | x | |
| 5.0.0 | x | ||||
| 4.7.0 | x | ||||
| 1.3.6 | x | x | x | x | |
| 1.3.5 | x | x | x | x | |
| 1.3.4 | x | x | x | x | |
| 1.1.2 | x | ||||
| 1.1.1 | x | ||||
| 1.3.2 | x | x | x | x | |
| 1.3.1 | x | x | x | x | |
| 1.3.0 | x | x | x | x | |
| 1.2.0 | x | x | x | x | |
| 1.1.0 | x |
v5.2.1 (Tosibox 175/610/650/670/675) - release date 2023-08-03
- Added support for sending the LAN device list information to TosiControl for further management
- Added ability to configure LAN device path for the http(s) service. Requires Key 3.3.0 support.
- Remote Support tunnel cannot be kept open indefinitely anymore. When enabling the Remote Support timeout must be selected. After update Remote Support will be open for 30 days before being closed.
- Used VPN connection protocol is displayed in the user interface, either relayed TCP or direct UDP
- Node will now automatically reboot if required during manual software update, reboot button click is not needed
- Fix where software update can fail over WLAN client connection
- Fix for internal modem issue where wrong SIM card can be shown active in the user interface
- Updated the underlaying OS with the latest patches and fixes
- Many bug fixes and security improvements as usual
v5.0.0 (Tosibox 610/650/670/675) - release date 2023-04-26
- Greatly enhanced security due to upgrading operating system to OpenWrt 21.02 and updated core system libraries
- WPA2-PSK is the default encryption algorithm for WiFi access point (Tosibox 650/675)
- Resolved issue where SIM slots were in wrong order if SIM slot selection was set to Automatic (Tosibox 670/675)
- New dropdown menu on internal modem page to select data connection type between dual stack IPv4/IPv6 and IPv4 only for LTE and 3G networks (Tosibox 670/675)
- Resolved issue where Restore Default Settings would not clear certain WAN settings
- LEDs will blink and an informative message is shown if matching a physical Key to a Lock has failed. Key can be fixed with Key client version 3.2.3 or newer
- Selected node highlight stays selected on the Status page
- Resolved invalid error message during device rename operation
- Numerous other bug fixes and security improvements
NOTE: Do not power off the device during update. This is a major system upgrade release. Upgrade will install and reboot the device if autoupdate is selected without user intervention. During the upgrade, the device is completely non-responsive and does not offer user interface for up to 30 minutes potentially giving the impression the device has failed. If device is powered off during the upgrade, there is a risk of bricking the device. Bricked device cannot be recovered.
v4.7.0 (Tosibox 610/650/670/675) - release date 2023-04-26
- Pending firmware upgrade notification on UI prior to installation
- Device offers a warning if user tries to reboot, and firmware upgrade is ongoing
- Firmware upgrades will always be automatically installed if auto-update is selected
v5.0.0 (Tosibox 175) - release date 2023-03-27
- Greatly enhanced security due to upgrading operating system to OpenWrt 21.02 and updated core system libraries
- New dropdown menu on internal modem page to select data connection type between dual stack IPv4/IPv6 and IPv4 only for LTE and 3G networks
- WPA2-PSK is the default encryption algorithm for WiFi access point
- Selected node highlight stays selected on the Status page
- Numerous bug fixes and security improvements
NOTE: Do not power off the device during update. This is a major system upgrade release. Upgrade will install and reboot the device if autoupdate is selected without user intervention. During the upgrade, the device is completely non-responsive and does not offer user interface for up to 30 minutes potentially giving the impression the device has failed. If device is powered off during the upgrade, there is a risk of bricking the device. Bricked device cannot be recovered.
v4.7.0 (Tosibox 175) - release date 2023-03-27
- Pending firmware upgrade notification on UI prior to installation
- Device offers a warning if user tries to reboot, and firmware upgrade is ongoing
- Firmware upgrades will always be automatically installed if autoupdate is selected
v1.3.6 (Tosibox 610, 650, 670, 675) - release date 2022-12-07
- Production maintenance release
v1.3.5 (Tosibox 610, 650, 670, 675) - release date 2022-08-24
- Resolved issue where static LAN IP address change results in UI non-reachable
v1.3.4 (Tosibox 610, 650, 670, 675) - release date 2022-08-08
- Support for new version of Tosibox Key HW
v1.1.2 (Tosibox 175) – release date 2022-08-08
- Resolved internal modem issues with some mobile network operators
v1.1.1 (Tosibox 175) – release date 2022-02-18
- AT&T 3G sunset mitigation, modem is configured in “Data centric” mode
v1.3.2 (Tosibox 610, 650, 670, 675) – release date 2022-02-18
- AT&T 3G sunset mitigation, modem is configured in “Data centric” mode
v1.3.1 (Tosibox 610/650/670/675) – release date 2021-12-20
- Fix to Tosibox 650 wifi LED
- Resolved issues with digital I/O support
V1.3.0 (Tosibox 610/650/670/675) – release date 2021-12-08
- Initial release for Tosibox 670/675
- Digital I/O support for Tosibox 610/650/670/675
- Several bug fixes and improvements
V1.2.0 (Tosibox 610/650) – release date 2021-11-17
- Initial release for Tosibox 610/650
v1.1.0 (Tosibox 175) – release date 2021-08-10
- Initial release for Tosibox 175.