;

TOSIBOX® Lock Software Releases

Modified on Wed, 27 Mar 2024 at 10:27 AM

Release notes are available under the table.


VersionRelease DateLock 100Lock 150Lock 200Lock 210Lock 250Lock 500
5.5.027/03/2024
x
xxx
5.4.029/01/2024
x
xxx
5.3.009/10/2023
x
xxx
5.2.103/08/2023
x
xxx
5.0.003/05/2023


xxx
4.7.003/05/2023


xxx
5.0.017/04/2023
x



4.7.017/04/2023
x



4.6.1007/12/2022
x


x
4.6.908/08/2022
x
xxx
4.6.814/06/2022


xxx
3.3.819/05/2022x




4.6.718/05/2022
x



4.6.619/04/2022


xxx
4.6.518/02/2022
x
xxx
3.3.718/02/2022x
x


4.6.316/11/2021




x
4.6.203/08/2021
x
xxx
4.6.103/06/2021
x
xxx
4.6.021/04/2021
x
xxx
3.3.629/03/2021

x


3.3.503/01/2021x
x


4.5.203/01/2021
x
xxx
4.5.102/11/2020
x


x
4.5.026/10/2020
x
xxx
4.4.117/09/2020
x


x
4.4.007/07/2020
x


x
4.3.631/03/2020




x
4.3.513/01/2020
x



4.3.313/01/2020
x


x
3.3.412/12/2019x
x


4.3.202/10/2019




x
4.3.104/09/2019
x



4.3.0
11/07/2019

x




4.2.1
18/06/2019
x


x
4.2.002/05/2019
x


x
4.1.020/02/2019




x
3.3.321/01/2019x
x


4.0.224/09/2018




x
4.0.124/07/2018




x
4.0.018/07/2018




x
3.3.222/01/2018x




3.3.109/01/2018





3.3.015/12/2017x
x


3.2.006/06/2017

x


3.1.507/10/2016

x


3.1.429/08/2016x
x


3.1.205/07/2016

x


3.1.116/06/2016x




2.14.309/06/2016x




3.1.020/05/2016x




3.0.413/10/2015

x


3.0.328/08/2015

x


2.14.126/08/2015x




3.0.203/06/2015

x


3.0.126/05/2015

x


3.0.020/05/2015

x


2.14.010/04/2015x




2.13.110/04/2015x




2.13.019/12/2014x




2.12.128/11/2014x




2.12.006/10/2014x




2.11.004/07/2014x




2.10.003/04/2014x




2.9.015/12/2013x




2.8.224/11/2013x




2.8.108/11/2013x




2.8.001/11/2013x





v5.5.0 (Lock 150/210/250/500) - release date 2024-03-27


Improvements

  • Modbus support. See more on Helpdesk article “How to use the Modbus
  • Https login for web UI using self-signed certificate
  • Status page WLAN section displays more information
    • “WLAN in Access Point mode” or “WLAN in Client mode”
    • Name of the connected network
  • Node will always reboot automatically after any firmware update from now on
  • Cellular module firmware update capability for Tosibox 670 and 675 NAM variants (TBL670US and TBL675US)
  • Confirmation is asked when clicking Disable Modem button
  • Node has a new favicon

Bugfixes

  • Resolved issue where the Internet fallback in Client mode would force Node to switch to cellular connectivity when LAN Internet connectivity was perfectly fine


v5.4.0 (Lock 150/210/250/500) - release date 2024-01-29


Tosibox 350/375 product launch


Improvements

  • Internet connection fallback support in Client Mode. With this feature the Node is able to switch to WAN, WLAN client or cellular connectivity when the LAN internet becomes unavailable, and revert to LAN connectivity when internet is restored. See more on Helpdesk article "How to change the Lock to Client mode".
  • Node sends status and many of its settings to TosiControl for monitoring
  • Status page Internet Connection field has been split into two separate fields;
    • Internet Connection - indication if connectivity to public Internet is working
    • Tosibox Cloud - indication if connectivity to Tosibox services is working. This field shows the same status that Internet Connection field previously displayed
  • When "Prevent VPN access from Internet" setting is enabled, Tosibox Cloud field on the Status page shows "Offline - Remote VPN access disabled" to indicate connectivity to Tosibox Cloud is blocked
  • "Prevent VPN access from Internet" setting description is clarified to indicate that connectivity to Tosibox Cloud is blocked with this setting
  • Confirmation was added to "Restore default settings"
  • Copy to clipboard button was added to copy the generated Remote Matching Code

Bugfixes

  • Changed the cellular signal level LED indication logic on the Tosibox 670, 675, 695 faceplate to light up LEDs only when SIM card is also inserted
  • Resolved issue where DNS queries coming from LAN devices to the Tosibox Node were relayed to public DNS servers even if "Prevent Internet access from LAN and SERVICE port" setting was on resulting in isolated LAN networks having potential security issue in the form of leaking DNS queries.
  • Resolved issue where enabled service port indication was not displayed on the Status page on Tosibox 610, 650, 670, 675
  • Resolved CVE-1999-0524. It is no longer possible to determine remote system time using ICMP type 13 request



v5.3.0 (Lock 150/210/250/500) - release date 2023-10-09

  • Tosibox 695 product launch
  • Login page supports rate limiting, login is prevented after 10 invalid attempts for 10 minutes
  • User can choose to display login password as asterisks or plain text
  • Password maximum length is now 128 characters
  • Password complexity is enforced
  • Password must contain an integer
  • Password must contain an upper case character
  • Password must contain a lower case character
  • Password length must be between 8-128 characters
  • Password can contain special characters
  • Password is tested against a black list of commonly known weak passwords
  • Space is not allowed
  • Unicode characters such as emojis, kanjis and Cyrillic are not accepted
  • Network device list are now clickable web links opening the configured web service
  • Resolved some rare faults in internal modem use
  • Resolved SMS sending issues with digital I/O on certain network operators
  • Resolved minor bugs in user interface
  • Removed support for Blowfish cipher



v5.2.1 (Lock 150/210/250/500) - release date 2023-08-03

  • Added support for sending the LAN device list information to TosiControl for further management
  • Added ability to configure LAN device path for the http(s) service. Requires Key 3.3.0 support.
  • Remote Support tunnel cannot be kept open indefinitely anymore. When enabling the Remote Support timeout must be selected. After update Remote Support will be open for 30 days before being closed.
  • Used VPN connection protocol is displayed in the user interface, either relayed TCP or direct UDP
  • Node will now automatically reboot if required during manual software update, reboot button click is not needed
  • Fix where software update can fail over WLAN client connection
  • Fix for internal modem issue where wrong SIM card can be shown active in the user interface
  • Updated the underlaying OS with the latest patches and fixes
  • Many bug fixes and security improvements as usual



v5.0.0 (Lock 210/250/500) - release date 2023-05-03

  • Greatly enhanced security due to upgrading operating system to OpenWrt 21.02 and updated core system libraries
  • New dropdown menu on internal modem page to select data connection type between dual stack IPv4/IPv6 and IPv4 only for LTE and 3G networks
  • WPA2-PSK is the default encryption algorithm for WiFi access point
  • Node name can no longer be blank
  • Resolved issue if autoupdate time was set to 08:00-10:00 update would happen at midnight instead
  • Resolved issue where Restore Default Settings would not clear certain WAN and external modem settings
  • LEDs will blink and and an informative message is shown if matching a physical Key to a Lock has failed. Key can be fixed with Key client version 3.2.3 or newer
  • Fixed rare issue where WLAN would interfere with internal modem connection
  • Resolved issue where DNS AAAA query can get lost if sent together with A query
  • Resolved invalid error message during device rename operation
  • More robust external modem support
  • Numerous bug fixes and security improvements

NOTE: Do not power off the device during update. This is a major system upgrade release. Upgrade will install and reboot the device if autoupdate is selected without user intervention. During the upgrade, the device is completely non-responsive and does not offer user interface for up to 30 minutes potentially giving the impression the device has failed. If device is powered off during the upgrade, there is a risk of bricking the device. Bricked device cannot be recovered.



v4.7.0 (Lock 210/250/500) - release date 2023-05-03

  • Pending firmware upgrade notification on UI prior to installation
  • Device offers a warning if user tries to reboot, and firmware upgrade is ongoing 
  • Firmware upgrades will always be automatically installed if auto-update is selected



v5.0.0 (Lock 150) - release date 2023-04-17

  • Greatly enhanced security due to upgrading operating system to
  • OpenWrt 21.02 and updated core system libraries
  • WPA2-PSK is the default encryption algorithm for WiFi access point
  • Node name can no longer be blank
  • Resolved issue if auto-update time was set to 08-10:00 update would happen at midnight instead
  • Resolved issue where restore default settings would not clear certain WAN and external modem settings
  • LEDs will blink and an informative message is shown if matching a physical Key to a Lock has failed. Key can be fixed with Key client version 3.2.3 or newer
  • Resolved invalid error message during device rename operation
  • Selected node highlight stays selected on the Status page
  • Resolved issue with MultiTech MTC-LEU4 (product code TBM4GM7) external modem not being detected after power loss
  • More robust external modem support
  • Numerous other bug fixes and security improvements

NOTE: Do not power off the device during update. This is a major system upgrade release. Upgrade will install and reboot the device if autoupdate is selected without user intervention. During the upgrade, the device is completely non-responsive and does not offer user interface for up to 30 minutes potentially giving the impression the device has failed. If device is powered off during the upgrade, there is a risk of bricking the device. Bricked device cannot be recovered.



v4.7.0 (Lock 150) - release date 2023-04-17

  • Pending firmware upgrade notification on UI prior to installation
  • Device offers a warning if user tries to reboot, and firmware upgrade is ongoing
  • Firmware upgrades will always be automatically installed if auto-update is selected



v4.6.10 (Lock 150, Lock 500) - release date 2022-12-07

  • Production maintenance release



v4.6.9 (Lock 150, 210, 250, 500) - release date 2022-08-08

  • Support for new version of Tosibox Key HW 



v4.6.8 (Lock 210/250/500) – release date 2022-06-14

  • Resolved issues with internal modem 
      


v3.3.8 (Lock 100) – release date 2022-05-19

  • Fix for issue where large number of Keys can impair connectivity 



v4.6.7 (Lock 150) – release date 2022-05-18

  • Fix for issue where large number of Keys can impair connectivity 

 


v4.6.6 (Lock 210, 250, 500) - release date 2022-04-19

  • Resolved issues with internal modem 



v4.6.5 (Lock 150, 210, 250, 500) – release date 2022-02-18

  • AT&T 3G sunset mitigation, modem is configured in “Data centric” mode 



v3.3.7 (Lock 100, 200) – release date 2022-02-18

  • AT&T 3G sunset mitigation, modem is configured in “Data centric” mode



v4.6.3 (Lock 500) – release date 2021-11-16

  • Modem related improvement



v4.6.2 (Lock 150, 210, 250, 500) – release date 2021-08-03

  • Fixed several security issues in third party libraries and the SW


Attention! Requires a reboot after updating the software.

 

 

v4.6.1 (Lock 150, 210, 250, 500) – release date 2021-06-03 

  • New User Interface has been introduced in this release for Lock 150, 210/250 and 500.
  • Updated WiFi driver, bringing stability into WiFi operation
  • WiFi UI improvements, improving user facing WiFi functionality 
  • Support for Alcatel IK41VE USB modem (Lock 150, Lock 210/250)
     Attention! Requires a reboot after updating the software.

 

 

v4.6.0 (Lock 150, 210, 250, 500) – release date 2021-04-21 

  • New variant Lock 500iD with support for new modem (Sierra Wireless EM7511). More details on the variant can be found from our materials for Lock 500 at https://www.tosibox.com/documentation-and-downloads/
  • Lock 150 / 210 / 250 USB modem related improvements:
    • AutoAPN support added for Huawei and Multitech modems
    • Added 3G/4G selection to UI
    • Improved logic for network operator related connectivity issues

 

 

v3.3.6 (Lock 200) – release date 2021-03-29 

  • Fixed an update issue found on Lock 200 3.3.5 release

 

 

v4.5.2 (Lock 150, 210, 250, 500) and v3.3.5 (Lock 100 & Lock 200) – release date 2021-01-03 

Fixed several security issues in third party libraries and products:

  • CVE-2020-25681
  • CVE-2020-25682
  • CVE-2020-25683
  • CVE-2020-25684
  • CVE-2020-25685
  • CVE-2020-25686
  • CVE-2020-25687

 

 v4.5.1 (Service release) – release date 2020-11-02 (Lock 500 and Lock 150)

  • Improved MTU handling for connections over internal modem
  • Stability improvements

 

 

v4.5.0 – release date 2020-10-26 (Lock 500, Lock 250, Lock 210, Lock 150)

  • Added warning for user if using default password
  • Added complexity rules for user defined password
  • Improved carrier change on internal modem page
  • User will need to accept EULA again when it changes
  • Fixed Lock 500 Internal modem PIN code handling

 

 

v4.4.1 (Service release) – release date 2020-09-17 (Lock 500 & Lock 150)

  • Fixed a rare case where Internal modem firmware update failed
  • Improved mobile network related failure handling for internal modem

   

 

v4.3.3 - release date 2020-01-13

  • Tosibox Key related support update

 

 

v3.3.4 – release date 2019-12-12

  • For Lock 100, this release is a System upgrade that needs to be installed manually from the Lock’s web user interface. For Lock 200, automatic update feature will fetch and install this release.
  • Several stability and usability improvements
  • Security fixes and improvements including 3rd party software component updates
  • MatchMaker connection improvements
  • Fixes to external modem use cases; fixes for several supported Huawei modems as well as Multitech MTC-LNA4 Verizon mode

 

 

v4.3.2 – release date 2019-10-02

  • Removal of network device improved on Lock UI
  • External modem status now shows IMEI correctly
  • Verizon operator ids fixed for internal modem
  • Fixed a bug in SoftKey assignments for Lock 500 
  • Fixed MNC code handling in APN functionality

 

 

v4.3.1 – release date 2019-09-04

  • Uptime for network connections is shown for each interface
  • Lock can now detect which SIM is in use and switch modem SW with Multitech MTC-LNA4
  • Fixed WiFi settings change Save button function
  • WiFi Auto Channel Selection fixed
  • Fixed a scenario where Lock has been offline even though connection to Internet has been working
  • Fixed Auto-APN with Tosibox® 4G modems
  • Using SIM with PIN code on TB4GM8EU fixed
  • Lock 150 ethernet interface detects when cable unplug

 


v4.3.0 – release date 2019-07-11

  • Added USB modem support for TB4GM (Huawei E3372), TB3GM2M (Huawei MS2131), TB4GM2M (Huawei MS2372)

 

 

v4.2.1 – release date 2019-06-18

  • Fix for an issue where WiFi Access Point was active even if disabled from UI (Lock 150)
  • Fix for an issue where WiFi stayed in Access Point mode when changing it to Client mode (Lock 150)
  • Fix for sending SMS on Digital I/O events where SMS was not sent if only DIO2 was selected (Lock 500)

 

 

v4.2.0 – release date 2019-05-02

  • Initial release for Lock 150
  • New feature: Digital I/O can be configured to send SMS alerts on Lock 500
  • Bug fix: Allow using FTP in active mode on Lock 500
  • Generic stability and performance improvements

 

 

v4.1.0 – release date 2019-02-20

  • Support for TOSIBOX® 4G USB modems TB4GM2EU and TB4GM2AU
  • Support for Automatic APN setting for internal and USB modems
  • Spanning Tree Protocol is now permanently disabled for LAN ports. In the past STP has caused problems in some Layer 2 configurations.
  • Improvements to overall usability & performance of WiFi

 

 

v3.3.3 – release date 2019-01-21

  • Added support for Verizon’s NovAtel U620L USB modem. (Lock 200 only)
  • Spanning Tree Protocol is now permanently disabled for LAN ports. In the past STP has caused problems in some Layer 2 configurations.
  • Lock now sets “full functionality” mode for all modems, making sure they are always operable.
  • Connecting an USB modem or the Internet to WAN port will not anymore automatically deactivate LAN’s DHCP client mode.
  • Fix for an issue where VLAN0 passthrough did not work with Siemens logic.
  • Fix for an issue where changing LAN address range over VPN did not work.
  • Fix for an issue where Lock 200 sometimes got stuck during boot.
  • Fix for an issue where Remote Matching was not possible for the Lock 200.

 

 

v4.0.2 – release date 2018-09-24

  • Fix for an issue where internal modem did not always establish connection after boot
  • Fix for an issue where network devices were not accessible via VPN when Lock was in DHCP client mode
  • Fix for an issue where after boot the Lock momentarily uses internal modem for WAN connection when it is not set as the primary WAN connection
  • Fix for an issue where changing LAN address range over VPN did not work
  • Fix for an issue where “Prevent internet connection” option for digital I/O had no effect
  • Fix for an issue where enabling or disabling service port closed VPN connection
  • Faster fallback to internal modem in case WAN connection with higher priority fails
  • Automatically load Status page after reboot triggered from web UI is complete


v4.0.1 – release date 2018-07-24

  • Fix for an issue where the VPN connection got disconnected after a while
  • Improved internal modem status LED operation

 

 

v4.0.0 – release date 2018-07-18

 

 

v3.3.2 – release date 2018-01-22

  • Fix for a VPN connection issue with Layer 2 connections on a Lock that also was configured as a Wi-Fi Access Point

 

 

v3.3.1 – release date 2018-01-09 (not available as over-the-air update)

  • Fixes related to product manufacturing

 

 

v3.3.0 – release date 2017-12-15

  • Added SoftKey support – this update is required in order to connect to the Lock with a SoftKey
  • New device icons for different client types in web UI
  • Master Key can now be matched remotely with the Lock (read more)
  • Mobile Clients inherit now their initial access rights from the Key that was used to create them
  • Improved reliability of LAN network scanner
  • Fix for an issue where adding an incomplete static route or another default route caused system malfunction
  • Fix for an issue where certain parts of the web UI didn’t work with Mozilla Firefox
  • Reliability improvements

 

 

v3.2.0 – release date 2017-06-06

  • Added support for Verizon/Novatel Wireless U620L USB modem
  • Added support for upcoming AU variant of TOSIBOX® 4G Modem (TB4GM2AU)
  • Fix for an issue where connecting a cable to WAN port caused an interruption of the USB modem connection.
  • Fix for an issue where the remote support functionality was still enabled after resetting default settings.

 

 

v3.1.5 – release date 2016-10-07

  • Fix for an issue where the LAN interface stopped working after reverting the unit back from Sub Lock to Lock

 

 

v3.1.4 – release date 2016-08-29

  • Recovering from an interrupted software upgrade happens now faster
  • Fix for an issue where refreshing signal strength indicator may interfere with the Internet connection with TOSIBOX® 3G Modem
  • Fix for an issue where the Lock could not always establish a connection through a proxy server
  • Fix for an issue where the USB modem connection would not always get established after an error situation
  • Lock 100: Fix for an issue where VLAN 0 pass-through setting caused communication problems with two or more Siemens SIMATIC S7 PLCs
  • Fix for an issue where the status web UI didn’t correctly load when device is configured as Sub Lock in client mode
  • Mitigation for a security issue with VPN connections using Blowfish cipher: TBSA-016-301(CVE-2016-6329)
    • The VPN data channel key is renegotiated much more frequently when Blowfish is used
    • AES-128-CBC is now the default VPN cipher for new Lock 100 production units
    • Lock-to-Lock and Lock-to-Central Lock connections now honor the VPN cipher setting of the main Lock or Central Lock
  • Includes also all changes from previous v3.1.x releases

 

 

v3.1.2 – release date 2016-07-05

  • SW v3.1 for Lock 200 – includes all changes from versions 3.1.0 and 3.1.1
  • The current active IPv4 routes are now shown on the Static routes page
  • Fix for an issue where automatic modeswitch from client mode didn’t work for all modems
  • Lock 200: fix for an issue where the device could freeze during a reboot in certain circumstances

 

 

v3.1.1 – release date 2016-06-16

  • Fix for an issue where TOSIBOX® 4G Modem did not work with SW v3.1.0. If the Lock is upgraded from SW v3.1.0 to v3.1.1, the Lock must be rebooted once before using the TOSIBOX® 4G Modem.

 

 

v3.1.0 – release date 2016-05-20

  • New, streamlined web user interface now for both Lock 100 and Lock 200
  • Improved web UI front/status page layout
  • Idle bandwidth consumption is reduced, especially when using USB modems (more information)
  • Added support for HTTP proxy servers
  • The Lock’s name is now shown and can be changed in the web UI
  • The Lock’s settings can now be restored to their default values in the web UI
  • Lock 200: Added support NTP (Network Time Protocol) server (Lock 200 only)
  • The default policy for IP/MAC filter can now be chosen
  • The device list on the Key and web UI now reflects the actual permissions set in IP/MAC filter
  • The list of Keys in IP/MAC filter is now alphabetically sorted
  • The serialized Locks can now be chosen as source device in IP/MAC filter
  • Added support for MultiTech MultiConnect Cell 100 series USB modems
  • Added support for upcoming TOSIBOX® 4G Modem
  • Added support for new Huawei E3531 and E3372 variants
  • Lock 200: Added support for Sierra FX 100 USB modem (Lock 200 only, limited TosiOnline™ support)
  • Lock 100: VLAN0 passthrough rules are now active only when there is a Key connected using Layer 2 connection type
  • Lock 200: Added support for VLAN-passthrough: VLAN-tagged frames can now be used in VPN <> LAN traffic with Layer 2 connections. This is required e.g. in certain functions with Siemens S7 devices. Requires a reboot after updating the software.
  • New production units now show the end-user license agreement when the admin logs in for the first time
  • “Prevent traffic between sublocks” setting is now set for new production units
  • Improved reliability of refreshing Lock status information in the web UI
  • More settings, including 1:1 NAT, can now be configured with the Configuration key
  • Lock 200: Fix for an issue where 1:1 NAT did not work on the Lock 200
  • Lock 200: The Configuration Key can now be used also with Lock 200
  • Fix for an issue where the default IP 0.0.0.0 was incorrectly translated when 1:1 NAT was enabled
  • Lock 100: Fix for an issue where the Lock could reboot during software update
  • Lock 200: Fix for an issue where the PoE out setting was visible on the WAN page
  • Lock 100: In FCC approved units (indicated on the label), WLAN channels 12 and 13 are disabled

 

 

v3.0.4 – release date 2015-10-13

  • Fix for an Internet connection issue with TOSIBOX 3G Modem (TB3GM2)
  • Modem signal strength indicator and refresh button are now displayed on the web UI

 

 

v3.0.3 – release date 2015-08-28

  • Added support for another Huawei E3372 variant
  • Time to establish layer 3 Key connection reduced by 5 seconds
  • Fix for an issue where the connection type was layer 2 instead of layer 3 for new backup and sub keys
  • Fix for an issue where http/https links where not shown for network devices in the Lock’s web UI

 

 

v2.14.3 – release date 2016-06-09

  • Fix for an issue where the software update to v3.x was not automatically installed

 

 

v2.14.1 – release date 2015-08-26

  • Added support for another Huawei E3372 variant
  • Time to establish layer 3 Key connection reduced by 5 seconds
  • Fix for an issue where the connection type was layer 2 instead of layer 3 for new backup and sub keys

 

 

v3.0.2 – release date 2015-06-03

  • Fix for an issue where saving network settings could restart the unit
  • Improved indication of physical serialization: The Key LED switches off and the info LED on stops blinking when the serialization is done
  • Fix for an issue where Keys and Locks settings page doesn’t show the modified items after saving

 

 

v3.0.1 – release date 2015-05-26

  • Fix for an issue where the web UI was slower when no Internet connection was available
  • Fix for disabling PoE output
  • Fix for a browser compatibility issue on some web UI pages
  • Fix for error note positioning on web UI

 

 

v3.0.0 – release date 2015-05-20



v2.14.0 – release date 2015-04-10

  • This release is a System upgrade that needs to be installed manually from the Lock’s web user interface (Settings -> Software update)
  • Support for iOS Mobile Clients
  • Key-specific IP/MAC filter: access to LAN network devices can now be defined separately for each Key
  • Added support for new USB modems: Huawei E3131i-2, a new Huawei E3372 variant, Vodafone K4605/Huawei E372, Gemalto EHS6T
  • “3G/4G only” is now the factory default network preference for USB modems
  • Signal strength is now indicated also for the Tosibox 3G Modem
  • Support for AES ciphers in VPN connection data encryption
  • Option to add exceptions for restricted Internet access (Industry settings ->Prevent Internet access from LAN …)
  • Idle bandwidth consumption is reduced
  • Fix for an issue where Lock did not accept rarely used netmasks
  • Fix for an issue where saving LAN settings did not restart the DHCP server
  • Stability improvements

 

 

v2.13.1 – release date 2015-04-10

  • Patch release to enable upgrading to 2.14.0
  • Support for Huawei E3131i-2

 

 

v2.13.0 – release date 2014-12-19

  • Support for new Huawei modem models: E3372, E3531, a new variant of E3276

 

 

v2.12.1 – release date 2014-11-28

  • Fix for an issue where the Lock might not reconnect to Internet after a network problem
  • Stability improvements

 

 

v2.12.0 – release date 2014-10-06

  • APN auto-configuration feature for detecting APN settings based on the mobile operator
  • Support for the Tosibox 3G modem
  • Support for a new Huawei E3131 variant
  • Idle bandwidth consumption reduced
  • Improved compatibility with FTP applications over 1:1 NAT with L3 Lock connections
  • Source NAT / masquerading can now be disabled in Layer 3 Lock connections
  • VPN is now disconnected/reconnected only when needed when saving Lock settings
  • Configuration Key: support for device-specific settings based on the product serial number
  • Improved reliability of DNS and DHCP servers when invalid settings are entered
  • Fix for an issue where serializations might have gotten lost

 

 

v2.11.0 – release date 2014-07-04

  • Support for Siemens SIMATIC S7 PLCs (VLAN 0 pass-through) – guide
  • New Locks with v2.11.0 and greater come with mode B as the factory default
  • Mode A is now called client mode
  • UI and usability improvements
  • Reliability improvements

 

 

v2.10.0 – release date 2014-04-03

  • 1:1 NAT feature that allows connecting several Locks with overlapping IP addresses to Central Lock
  • Support for Configuration Key functionality that allows customer specific Lock settings to be configured during physical serialization
  • Keys are now serialized with Layer 3 connection type by default
  • Fix an issue where MAC filter might have not worked with Layer 3 connections
  • Fix an issue with LAN access in mode A when Internet access is disabled by the administrator

 

 

v2.9.0 – release date 2013-12-15

  • Support for connecting Locks to Central Lock with Layer 3 connection type
  • Support for synchronizing device lists between Central Lock and Locks connected using Layer 3
  • Stability and performance improvements

 

 

v2.8.2 – release date 2013-11-24

  • Fix an issue where the Lock’s internal configuration might have corrupted
  • Fix an issue where entering invalid netmask might have prevented DHCP server functionality
  • Fix an issue where Lock might incorrectly claim to be in mode B
  • Fix an issue with software update progress bar

 

 

v2.8.1 – release date 2013-11-08

  • Fix a memory leak issue that might have caused stability problems

 

 

v2.8.0 – release date 2013-11-01

  • Support for Mobile Clients
  • Add an option to prevent VPN connections from Mobile Clients
  • Fix an issue where web UI might have required page reloading in order to work properly
  • Support for new Tosibox Key HW revision
  • USB power is now switched off for 20 seconds after physical serialization